Hi Johan, Are trying to do 6PE or 6VPE ?
Would be helpfull if you share the relevant configuration you have applied on your routers. If you are trying to 6VPE, you will need the family inet6-vpn too on the MP-iBGP. Thanks On Friday, 4 April 2014, Johan Borch <[email protected]<javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote: > Hi! > > I'm trying to tunnel ipv6 over mpls ipv4 core using the ipv6-tunneling > knob, following this document: > > http://www.juniper.net/techpubs/en_US/junos13.1/topics/example/mpls-tunneling-ipv6-over-mpls-ipv4.html > > I'm not finding that document that helpfull and can't get it to work. > family ipv6 is enabled on all interfaces and ipv6-tunneling on protocol > mpls. But in this case the customer is directly connected to the PE and > have a vrf/l3vpn there, do I still need the whole inet6 ebgp stuff? > > Regards > Johan > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- ./diogo -montagner JNCIE-SP 0x41A _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
