I'm think it should work fine, and i suggest you check your st0.X's MTU. Best Regards,
Jack Xu Senior Engineer Tel:(86)-13524613903 QQ:838178533 -----邮件原件----- 发件人: juniper-nsp [mailto:[email protected]] 代表 Levi Pederson 发送时间: 2014年5月9日 4:05 收件人: [email protected] 主题: [j-nsp] Site to Site VPN issues with Cluster Greetings, I've created several VPNs with little or no trouble in the past. Between both Cisco and Juniper devices. But I am a little stumped by I cannot connect a simple (Static IP) IPSec Tunnel between an SRX240 Cluster and a single srx210. I've checked the policies and the proposals and they are spot on identical. I've put the external interface on the cluster (lo0.0) on the right external zone. I'm also running OS 12.1.X44.D30 which supports. I've been reading several diatribes on how to place the loopback into the redundancy and I have done that as well. I'm still gathering the configurations for perusal as they need to be secured. First question would be, does anything instantly pop out to anyone? I'll have the configs loaded as soon as I can. Thank you, *Levi Pederson* Mankato Networks LLC cell | 612.481.0769 work | 612.787.7392 [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
