If you actually have USB devices plugged into the device, I would try removing them before rebooting again.
If you can't break into UBoot prompt after that, it's probably time for a JTAC case and possibly an RMA. --tc On Wed, May 14, 2014 at 4:38 AM, Jonas Frey (Probe Networks) < [email protected]> wrote: > Hello, > > i am having problems with a EX4200 which is stuck in U-boot. > > Before i can break the U-boot sequence it just hangs at: > > U-Boot 1.1.6 (Feb 6 2008 - 11:27:42) > > Board: EX4200-48POE 2.17 > EPLD: Version 6.0 (0x85) > DRAM: Initializing (1024 MB) > FLASH: 8 MB > USB: scanning bus for devices... 2 USB Device(s) found > scanning bus for storage devices... 1 Storage Device(s) found > > One the front panel LCD it reads: "POST Eth pass.." > > Anyone have any idea howto fix this? > > BR, > Jonas > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
