Hello guys, last night we upgraded EX8216 from 10.1 to 12.3 (current JTAC recommended). Everything seems to be OK, except strange log messages:
mrvl_nh_verify_dit() Trying to over write an active dit entry: 42, devNum: 0, ucast_used: 0 Error,mrvl_nh_ucast_install DIT_IDX overrite, hw_tolen: 0x802acfb6 nh_ucast_install:727Failed to create platform state for nh (7630), invalid argument nh_ucast_add:200Failed to install in platform, invalid argument for NH (7630) nh_add_helper:927Type specific Add failed invalid argument nh-id:7630 nh_ucast_change_major:312Failed to instantiate new copy for NH(7630) nh_change_helper:1290Failed to change state for NH (7630) mc DIT g_dit_idx = 65 is overwritten Information about NH 7630: > start shell %vty fpc 2 PFEM2(vty)# show nhdb id 7630 ID Type Interface Next Hop Addr Protocol Encap MTU Flags PFE internal Flags ----- -------- ------------- --------------- ---------- ------------ ---- ---------- -------------------- 7630 Unicast vlan.725 172.19.24.218 IPv4 Ethernet 0 0x00000000 0x00000000 This IP (172.19.24.218) belongs to the STB, which is operational - including multicast. Apart from this, there is a lot of messages like: member0-fpc2 mc DIT g_dit_idx = 65 is overwritten Now we can't open a case in the JTAC. Has somebody experienced similar issue? Can this somehow affect services? Thanks _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
