If you need to do any per unit scheduling, then you will need the MIC, last time I checked/tried it still didn't work on the onboard 10Gig NIC's on the MX5-80's and I believe the MX104 onboard 10gig's are the same.
Simon. On 6 August 2014 17:59, Blake Willis <[email protected]> wrote: > Hi Rob, > > You might also consider the recent MX104 "bundle" MX104-40G-AC-BNDL: > > "MX104 PROMOTIONAL BUNDLE, 40G, 2X10G BUILT-IN PORTS, 1 SERVICE MIC SLOT, > 1 INTERFACE MIC SLOT, REDUNDANT AC PS. SW LICENCES INCLUDED: JUNOS, ADV-R, > JFLOW-5G" > > Cost should be about the same as an MX5 + 2x10GE MIC (possibly even a > little > cheaper), but you get a better RE, an open MIC slot, and more expansion > capability down the road. > > Good luck. > > -Blake > > --- > Blake Willis > Network Engineering Consultant > Scalable System Design LLC > > "Education enabling individuals to overcome their reluctance or > inability to > take full advantage of technological advances and product innovation can > be a > means of increasing economic opportunity." > > --Alan Greenspan > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
