You need to find the entry for that IP address in the ARP table on whatever device(s) are terminating the L3 connectivity for that subnet. That will then give you the MAC address that you can look up in the ethernet-swtiching-table on the EX2200.
Edward Dore Freethought Internet On 26 Aug 2014, at 12:22, Evangelos Kanarelis <[email protected]> wrote: > Hello everybody > > I am relatively new to networking and I am currently managing a few EX2200 > switches. > > I need to find to which port a machine is connected to, but all I have is an > IP Address. I know that I can use show ethernet-switching table brief but > unfortunately I do not have the MAC address. > > Any help would be greatly appreciated. > > Thank you > > Angelo Kanarelis > Infrastructure Support Engineer > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
