Buy the cheapest l3 switch that works for you and get JunOS firefly --
really.
It does most things you could see yourself doing anytime soon.
On 9/10/2014 午前 12:37, Tyler Christiansen wrote:
Sorry, that should have been EX3300.
On Tue, Sep 9, 2014 at 8:28 AM, Volodymyr Samodid <
[email protected]> wrote:
Hi,
are you sure about VC and EX3200 ? I can't find any information in KB
about that.
Thanks.
On 09/04/2014 07:38 PM, Tyler Christiansen wrote:
It also depends on what certifications you're going for. Also need to
keep
in mind that EX2200 and EX3200, while capable of virtual chassis, do not
have dedicated virtual chassis ports. None of those devices will let you
do some of the switching features necessary for SP exams, and the J2300
and
J4300 are end of sale. I haven't used the J series, but if they require a
different Junos image than the J4350 or J2320, it may be difficult to find
a new(er) Junos image.
I would honestly just buy a few EX4200s and use Junos Firefly (or whatever
it's called now) for the routing. If you can afford it, Junosphere is
excellent. Not that it's expensive, but it does cost money, and if you
don't use it for a significant portion of the day, it can be a "waste" of
money. Junosphere is due for v4 soon (there used to be a notice about
potential downtime while systems are upgraded to support it--or something
to that effect).
--tc
On Thu, Sep 4, 2014 at 9:17 AM, Scott Granados <[email protected]>
wrote:
This actually looks interesting, thanks for the pointer.
On Sep 4, 2014, at 12:11 PM, ryanL <[email protected]<mailto:
[email protected]>> wrote:
something like this might be overkill, but might save you a lot of money
on rack rentals if you plan on spending loads of time on this.
http://www.ebay.com/itm/MUST-SEE-1OFAKIND-JUNIPER-JNCIE-
JNCIS-JNCIA-CCIE-CCNP-COUNTERPART-CISCO-LAB-/141393100611?pt=US_Wired_
Routers&hash=item20ebaf7f43
(not my listing, just an example, buyer beware, etc etc)
On Thu, Sep 4, 2014 at 11:58 AM, Scott Granados <[email protected]
<mailto:[email protected]>> wrote:
Hi,
I’m starting down the path of certifications and wondering what people
use
for practice labs in terms of hardware? I did some googling but have
mostly found rack rental services. Is this the primary method? Is there
anyone putting together bundles for sale of used equipment like you might
find for Cisco hardware? If not what hardware do people suggest for a
home
lab that’s reasonably cost effective. Any suggestions would be most
appreciated. Any pointers to pre made kits or other solutions would also
be greatly appreciated.
Thanks
Scott
_______________________________________________
juniper-nsp mailing list [email protected]<mailto:
[email protected]>
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
С уважением,
Самодед Владимир
SVAJ-RIPE|SVA88-UANIC
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
