Hi Tom, Did you manage to get an answer for this. I am also looking for an explanation to interfaces that have been captured as part of a SNMP walk on our MX.
Can anyone shed any light on what a pfe and pfh interface is ? Is there a doc with all interface types that describe what these are ? I have searched and couldn't find a satisfactory document. Thanks JFD On 21 November 2011 17:22, Thomas Eichhorn <[email protected]> wrote: > Dear all, > > I just saw some interfaces named > pfe- and pfh- on a trio based > MX960: > > teichhorn@R10-et> show interfaces pfh-7/0/0 > Physical interface: pfh-7/0/0, Enabled, Physical link is Up > Interface index: 135, SNMP ifIndex: 549 > Speed: 800mbps > Device flags : Present Running > Link flags : None > Last flapped : Never > Input packets : 0 > Output packets: 0 > > Logical interface pfh-7/0/0.16383 (Index 328) (SNMP ifIndex 552) > Flags: SNMP-Traps Encapsulation: ENET2 > Bandwidth: 0 > Input packets : 0 > Output packets: 0 > Protocol inet, MTU: Unlimited > > teichhorn@R10-et> show interfaces pfe-7/0/0 > Physical interface: pfe-7/0/0, Enabled, Physical link is Up > Interface index: 136, SNMP ifIndex: 550 > Speed: 800mbps > Device flags : Present Running > Link flags : None > Last flapped : Never > Input packets : 0 > Output packets: 0 > > Logical interface pfe-7/0/0.16383 (Index 327) (SNMP ifIndex 553) > Flags: SNMP-Traps Encapsulation: ENET2 > Bandwidth: 0 > Input packets : 0 > Output packets: 0 > Protocol inet, MTU: Unlimited > Protocol inet6, MTU: Unlimited > > My best guess would be that pfe-x/x/x has something to do > with the pfe, but pfh is completely unclear... > > Has someone here a little bit more information about the purpose > of these ifaces? > > Thanks, > Tom > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
