AFAIK, there is no such config or any hidden knob count the dropped packet.
If this is a test scenario you can do following (this is just an imagination which i had): on an interface you want to see the storm control dropped packet you can graph that interface for couple of hrs or days, in any of the snmp graphing tools (polling here should be very frequent, let say every 10 sec). Then create a thresh-hold to pass traffic on that interface. At the time of storm you may have an idea how much packet was dropped. > Date: Mon, 3 Nov 2014 17:29:11 +0100 > From: [email protected] > To: [email protected] > Subject: [j-nsp] Counters for Storm-Control on EX switches? > > Hello, > > are there any counters showing how many packets are dropped by storm > control on a Juniper EX? It doesn't show up in dropped packets, only > produces a (not very informative) syslog message. > > Regards > > Sebastian > > -- > GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) > 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE > SCYTHE. > -- Terry Pratchett, The Fifth Elephant > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
