Mike,
I'd be very interested in the particulars of your issues.
What sorts of boot-time issues are you seeing? I'm not sure what
you mean by "leaves the configs visible identical". Do you have a
PR or support case already open?
FWIW, you might be better off doing the "commit to git" script as
an event script, triggered by the commit event. As an event script,
it would be done after your commit, in the background.
Thanks,
Phil
Mike Williams writes:
>I would not use that commit script if I were you, and I wrote it.
>We don't anymore.
>
>On single devices it might be OK but we use a lot of J/SRX clusters and all
>sort of nastiness occurs when they reboot.
>JUNOS issues a commit during boot, it's easy to blindly accept it in the
>commit script but it leaves the configs visible identical by actually
>different between cluster members.
>
>On Monday 10 November 2014 18:46:29 Stefan Cioata wrote:
>> Hello everyone,
>>
>> The only partial reference to my problem that I found on the net was posted
>> by:
>>
>> Author Message
>> Mike Williams
>> PostPosted: Thu Mar 20, 2014 1:50 pm Post subject: configuration
>> archival, commit comments
>>
>>
>>
>> Here is my challenge:
>>
>> a) I use system archival
>>
>> stefan@stefan_test_desktop> show configuration system archival
>> configuration {
>> transfer-on-commit;
>> archive-sites {
>> "scp://[email protected]:/data/backup/" password
>> "$9$a9JjqTz6ApBGDi.f56/"; ## SECRET-DATA
>> }
>> }
>>
>> b) the file arrives at the destination with the user striped:
>>
>> [root@anetlogger backup]# zcat
>> stefan_test_desktop_juniper.conf.gz_20140217_221525 | more
>> ## Last changed: 2014-02-17 22:15:20 PST<---------------- *by stefan is
>> missing!!!*
>> version 12.3R2.5;
>> /*
>> * $Id$
>> *
>> * ex4200-defaults.conf - Default configurations for EX4200
>> *
>> * Copyright (c) 2010, Juniper Networks, Inc.
>> * All rights reserved.
>> */
>> groups {...
>>
>> the backup file is different then:
>>
>> stefan@stefan_test_desktop> show configuration
>> ## Last commit: 2014-11-10 14:40:52 PST by stefan*<-----------The info is
>> there!!!*
>>
>> c) I would like to implement git. That will require at minimum to have the
>> user on the ".gz transferred file.
>>
>> Any help would be more the apreciated.
>>
>> Thank you,
>>
>> Stefan
>> _______________________________________________
>> juniper-nsp mailing list [email protected]
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>--
>Mike Williams
>_______________________________________________
>juniper-nsp mailing list [email protected]
>https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
