I have 12.3R8.7 running on 2 MX-80s and 2 MX-480s with mixed results. The good news is the routers will reconverge with sampling enabled now and the PFE programming won’t block hard. The process is still slow however and while we did some testing it still seems that the processes hang during large updates although they do eventually un-wedge and complete. The CPU spikes though seem pretty few and far between so that is an improvement. I’m hoping the rewrite of the sampled and PFE programming in the 13.3 code is improved. With sampling enabled these boxes reconverge to slowly, especially for modern hardware.
On Dec 1, 2014, at 6:09 PM, Jordan Whited <[email protected]> wrote: > Has anyone else made the jump to 12.3R8 yet? > > On Wed, Oct 1, 2014 at 8:35 AM, Justin M. Streiner <[email protected]> > wrote: > >> On Wed, 1 Oct 2014, Sebastian Wiesinger wrote: >> >> * Graham Brown <[email protected]> [2014-09-23 22:33]: >>> >>>> 12.3R8 and 13.3R4 are due out anytime now with the fixes in place. I >>>> think >>>> there are many people waiting for these two releases... >>>> >>> >>> So, 12.3R8 is out. Any practical experiences if inline jflow / >>> sampling is faster now? >>> >> >> Not sure yet. I need to load it on my lab routers, but I won't know how >> it behaves at full scale until I load it in production. >> >> jms >> >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
