But it also looks like you need to populate those ports with XFPs.
Sent from my iPhone > On Jan 14, 2015, at 4:48, Dave Bell <[email protected]> wrote: > > It looks like you have a card which has 2x10GE interfaces installed... > > FPC 5 REV 18 750-022765 XX4446 DPCE 20x 1GE > + 2x 10GE R > > http://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/dpc-mx-series-dpce-r-20ge-2xge-description.html > >> On 14 January 2015 at 09:45, Mohammad Khalil <[email protected]> wrote: >> Thanks for the replies >> I have the machine up and running with SFPs for 1G capacity >> I want to know if it supports 10G SFPs installation >> >> admin@CR01-A> show chassis hardware >> Hardware inventory: >> Item Version Part number Serial number Description >> Chassis JN1160459AFB MX480 Midplane >> Midplane REV 05 710-017414 ABAA5940 MX480 Midplane >> FPM Board REV 02 710-017254 XY0425 Front Panel Display >> PEM 0 Rev 01 740-022697 QCS0946C06T PS 1.2-1.7kW; >> 100-240V AC in >> PEM 1 Rev 01 740-022697 QCS0951C00W PS 1.2-1.7kW; >> 100-240V AC in >> PEM 2 Rev 01 740-022697 QCS0951C00P PS 1.2-1.7kW; >> 100-240V AC in >> PEM 3 Rev 01 740-022697 QCS0946C027 PS 1.2-1.7kW; >> 100-240V AC in >> Routing Engine 0 REV 09 740-015113 9009023662 RE-S-1300 >> CB 0 REV 07 710-021523 XX6292 MX SCB >> FPC 5 REV 18 750-022765 XX4446 DPCE 20x 1GE + 2x >> 10GE R >> CPU REV 03 710-022351 XX4190 DPC PMB >> PIC 0 BUILTIN BUILTIN 10x 1GE(LAN) >> Xcvr 0 REV 02 740-013111 9423555 SFP-T >> Xcvr 1 REV 01 740-031851 AC1101S005S SFP-SX >> Xcvr 2 REV 02 740-013111 9420346 SFP-T >> Xcvr 3 REV 02 740-013111 9423194 SFP-T >> Xcvr 4 REV 02 740-013111 9420414 SFP-T >> Xcvr 5 REV 02 740-013111 9423127 SFP-T >> Xcvr 6 REV 02 740-013111 9420351 SFP-T >> Xcvr 7 REV 02 740-013111 9420272 SFP-T >> Xcvr 8 REV 02 740-013111 9420480 SFP-T >> Xcvr 9 REV 02 740-013111 9420573 SFP-T >> PIC 1 BUILTIN BUILTIN 10x 1GE(LAN) >> Xcvr 0 REV 02 740-013111 9420295 SFP-T >> Xcvr 1 REV 02 740-013111 B111787 SFP-T >> Xcvr 2 REV 02 740-013111 B131674 SFP-T >> Xcvr 3 REV 02 740-013111 9420452 SFP-T >> Xcvr 4 REV 02 740-013111 A492228 SFP-T >> Xcvr 5 REV 02 740-013111 A492642 SFP-T >> Xcvr 6 REV 02 740-013111 9414690 SFP-T >> Xcvr 7 REV 02 740-013111 A492426 SFP-T >> Xcvr 8 REV 02 740-013111 B149378 SFP-T >> Xcvr 9 REV 02 740-013111 9420474 SFP-T >> PIC 2 BUILTIN BUILTIN 1x 10GE(LAN/WAN) >> PIC 3 BUILTIN BUILTIN 1x 10GE(LAN/WAN) >> Fan Tray Left Fan Tray >> >>> On Tue, Jan 13, 2015 at 9:38 PM, Brad Fleming <[email protected]> wrote: >>> >>> Supports? Or has 10G interfaces currently installed? If you’re looking for >>> installed 10G interfaces your can use the “show interface terse | match >>> xe-“ command to find only the 10G interfaces currently installed in the >>> box. NOTE: If you have SFP+ ports they will not show as ge- or xe- until >>> the optic slot is populated since their personality can change with the >>> module. >>> >>> >>>> On Jan 13, 2015, at 8:28 AM, Mohammad Khalil <[email protected]> wrote: >>>> >>>> Hi all >>>> How can I know if My device supports 10G interfaces? >>>> _______________________________________________ >>>> juniper-nsp mailing list [email protected] >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
