Thanks for the advice... but I'm not asking 'if' I should... I am asking 'how to'. I know the risks involved.
These units are just too sensitive... and for this solution, if I am not able to tweak the temperature settings, I may have to replace them with another vendor. Even if these units turned off, cooled down and turned back on a little bit later, that would be ok, but they are in remote unattended locations, and they are becoming frustrating and expensive to go to site to reboot. ...Skeeve *Skeeve Stevens - Founder & Chief Network Architect* eintellego Networks Pty Ltd Email: [email protected] ; Web: eintellegonetworks.com Phone: 1300 239 038 ; Cell +61 (0)414 753 383 ; Skype: skeeve Facebook: eintellegonetworks <http://facebook.com/eintellegonetworks> ; Twitter: eintellego <https://twitter.com/eintellego> LinkedIn: /in/skeeve <http://linkedin.com/in/skeeve> ; Expert360: Profile <https://expert360.com/profile/d54a9> The Experts Who The Experts Call Juniper - Cisco - Cumulus Linux - Cloud - Consulting - IPv4 Brokering On Mon, Jan 19, 2015 at 11:36 AM, Alexandre Guimaraes < [email protected]> wrote: > Skeeve, > > Impossible to change fan configuration at SRX100 they don´t have > fan. > > And, do no change temp thresholds, even you do that, the firewall > will burn and will stop working, those components inside didn´t handle very > well with high temperature. Try to improve the air flow to keep your SRX100 > Services Gateway working on a safe temp. > > From Juniper Techpubs: The SRX100 Services Gateway does not include a fan > and does not generate any acoustic noise. > > > --Alexandre > -----Mensagem original----- > De: juniper-nsp [mailto:[email protected]] Em nome de > Skeeve Stevens > Enviada em: domingo, 18 de janeiro de 2015 21:28 > Para: [email protected] > Assunto: [j-nsp] SRX1xx Temperature Thresholds > > Hi guys, > > I have two SRX 100 series (100 + 110) which both sit on or near the yellow > alarm threshold at all times. On a warm day they hit reach the Red alarm > and shut down. > > I would like to increase the threshold by a few degrees on both units. > Does anyone know how to do this? > > > ====== > > admin@SS-*SRX100*-GW> show chassis temperature-thresholds > Fan speed Yellow alarm Red alarm > Fire Shutdown > (degrees C) (degrees C) (degrees C) > (degrees C) > Item Normal High Normal Bad fan Normal Bad fan > Normal > Chassis default N/A N/A 63 N/A 72 N/A > 90 > Routing Engine N/A N/A 63 N/A 72 N/A > 90 > > admin@SS-*SRX100*-GW> show chassis environment > Class Item Status Measurement > Temp Routing Engine OK 63 degrees C / 145 degrees > F > > --- > > admin@SS-*SRX110*-GW> show chassis temperature-thresholds > Fan speed Yellow alarm Red alarm > Fire Shutdown > (degrees C) (degrees C) (degrees C) > (degrees C) > Item Normal High Normal Bad fan Normal Bad fan > Normal > Chassis default N/A N/A 70 N/A 92 N/A > 95 > Routing Engine N/A N/A 70 N/A 92 N/A > 95 > > admin@SS-*SRX110*-GW> show chassis environment > Class Item Status Measurement > Temp Routing Engine OK 68 degrees C / 154 degrees > F > > > ...Skeeve > > *Skeeve Stevens - Founder & Chief Network Architect* eintellego Networks > Pty Ltd > Email: [email protected] ; Web: eintellegonetworks.com > > Phone: 1300 239 038 ; Cell +61 (0)414 753 383 ; Skype: skeeve > > Facebook: eintellegonetworks <http://facebook.com/eintellegonetworks> ; > Twitter: eintellego <https://twitter.com/eintellego> > > LinkedIn: /in/skeeve <http://linkedin.com/in/skeeve> ; Expert360: Profile > <https://expert360.com/profile/d54a9> > > > The Experts Who The Experts Call > Juniper - Cisco - Cumulus Linux - Cloud - Consulting - IPv4 Brokering > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
