I have a very basic configuration but can't get link between a Cisco 3560 and
the SRX 240h:
ge-0/0/0 { description "port 21 on 3560 switch"; gigether-options {
redundant-parent reth1; }}...reth1 { redundant-ether-options {
redundancy-group 1; } unit 0 { family inet { address
192.168.0.1/24; } }}
Port 21 on the Cisco switch does not have any configuration at all. The site is
still being built so the HA member has not been set up yet.
Jonathan
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
