Hi Tom, It seems the command you are looking for is "neighbour <CE_IP> next-hop-unchanged". Then however you would need to make sure that the CE has a route for the original next hop.
adam > -----Original Message----- > From: juniper-nsp [mailto:[email protected]] On Behalf > Of Tom Eichhorn > Sent: 20 February 2015 20:17 > To: jnsp > Subject: [j-nsp] Route Reflector within a L3VPN > > Hi Guys, > > I currently try to bring the following construct to work: > > I have a standard CE-PE-PE-CE l3vpn construct, and want to use as CE-PE > protocol BGP. > But I want the CE not talk BGP to the PE (that is standard and everyone > can do that), but instead to a RR. > What I did is creating the routing instance on the RR, configure > protocols bgp foo within in the routing-instance, > and also got the CE talk to that instance route reflector. > > But now comes the catch: the reflected routes to the PE have as next-hop > always the RR, and the RR has the PE as next-hop. > I believe I only have to find the right knob to push from RR to PE > simply the origin next-hop as sent from the CE, > but I didn't find it - any clues? > > Thanks, > Tom > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp --------------------------------------------------------------------------------------- This email has been scanned for email related threats and delivered safely by Mimecast. For more information please visit http://www.mimecast.com --------------------------------------------------------------------------------------- _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
