Ok, I’m running 13.2X51-D26.2 now and can’t find out much about this code other than that’s what was installed when they shipped the units.
I’m thinking going to the recommended version makes the most sense. Thank you and the others who have responded, most helpful. On Mar 19, 2015, at 9:09 AM, Tore Anderson <[email protected]<mailto:[email protected]>> wrote: * Scott Granados <[email protected]<mailto:[email protected]>> Hi, I’m wondering what people recommend for a software release for the EX 4500 switch in a virtual chassis configuration. I noted that there is 13.2 code installed in my cluster now but the recommended version on the web site is 12.3R8 which obviously doesn’t match. What are people using and or how should I reconcile the difference and find the right train to follow? Any pointers would be most appreciated. We've got a couple of dual-node EX4500 VCs on 12.3R8. We've had only one issue, a single port whose SFP turns off the Tx laser when the interface is enabled and vice versa (see the thread I started on the 6th of March). No idea if it is due to a JUNOS bug though or if it is fixed in another version. Tore _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
