Hi I'm looking for hint how to configure port in QinQ mode on MX. I need to have QinQ enabled on ge-1/1/7 (Customer) and interconnected via Trunk port to EX4200 on ge-1/1/9. VLAN ID can be 104.
I looked at manuals but cannot find this. My current L2 bridging configuration: set interfaces ge-1/1/8 unit 0 family bridge interface-mode access set interfaces ge-1/1/8 unit 0 family bridge vlan-id 101 set interfaces ge-1/1/9 unit 0 family bridge interface-mode trunk set interfaces ge-1/1/9 unit 0 family bridge vlan-id-list 102 set interfaces ge-1/1/9 unit 0 family bridge vlan-id-list 103 set bridge-domains VLAN101 domain-type bridge set bridge-domains VLAN101 vlan-id 101 set bridge-domains VLAN102 domain-type bridge set bridge-domains VLAN102 vlan-id 101 set bridge-domains VLAN103 domain-type bridge set bridge-domains VLAN103 vlan-id 101 Thanks Rob _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
