Le 03/06/15 16:38, Mark Tinka a écrit :
Yes, this is for Layer 2 traffic over native or LAG links. ECMP traffic would assume you're running IP/MPLS on the EX4550. Never ran IP/MPLS on the EX switches, so can't tell you.
As I already mentionned here EX can do MPLS but have a lot of limitation. So if you plan to use EX as P router I advice to carefuly test/stage it. afaik ecmp is not supported on EX.
-- Raphael Mazelier _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
