Hi Raphael/List, I found that when updating JunOS to 14.1X53-D25.2 from 13.2, it appears interface counters are working "properly".
A lot of frustration can now be avoided. Thanks! -Vinny On Tue, Jun 2, 2015 at 1:22 AM, Raphael Mazelier <[email protected]> wrote: > > > Le 01/06/15 22:15, Stipo a écrit : >> >> Hi, >> >> I'm having an issue monitoring traffic statistics on IRB interfaces. >> The counters appear to only be counting control plane traffic. >> >> I need to monitor L3 traffic being forwarded on the interface. >> >> I've seen some references to this behavior in EX series switches, >> however not the QFX. >> > > I faced the same issue/fonctionnality some week ago :) > EX/QFX share the same code, and some hardware, so no surprise here. > > So it's a known issue that all counters in irb/vlan/l3 sub interface only > count traffic to/from the RE. > >> Is there a way to accomplish this? I would be grateful for any assistance. >> > > The best workarround is to use firewall filter counters. I've used this on > advice of the list, and it work very well. The only drawback is that you > have to find the correct snmp oid for each counter, but it can easily be > scripted. > > -- > Raphael Mazelier > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
