Hi everyone. I powered off an M7i yesterday to relocate it to a new rack, and after powering back on it seems to have forgotten it has a CF and HDD or even a PCMCIA slot, and is only attempting to boot from ethernet.
e.g. Will try to boot from : Ethernet Boot Sequence is reseted due to a PowerUp Trying to Boot from Ethernet Intel UNDI, PXE-2.0 (build 078) Copyright (C) 1997,1998,1999 Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel PXE ROM. Trying to Boot from Ethernet Intel UNDI, PXE-2.0 (build 078) Copyright (C) 1997,1998,1999 Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel PXE ROM. Trying to Boot from Ethernet .... and so on. Tried a reseat of the RE, reseated the CF, reset, power on/off the whole chassis. Nothing seems to be working. Has anyone come across this before and knows how to fix it, other than replacing the RE? I had a similar issue with it once before, but at that stage it actually booted to a version-ish of JunOS where I was able to re-configure the bootlist to include the HDD and CF, this time its not even getting that far. :-( Cheers Tom _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
