Hi, Juniper-nsp. I tried configure port mirrror on mx80, but i have problem I don't watch traffic on the port ge-1/0/5
set chassis fpc 1 pic 1 port-mirror-instance mirror_reductor set forwarding-options port-mirroring instance mirror_reductor input rate 1 set forwarding-options port-mirroring instance mirror_reductor input run-length 0 set forwarding-options port-mirroring instance mirror_reductor family inet output interface ge-1/0/5.0 next-hop 192.168.98.2 set forwarding-options port-mirroring instance mirror_reductor family inet output no-filter-check set firewall filter mirror_reductor term dst-http-https from protocol tcp set firewall filter mirror_reductor term dst-http-https from destination-port 80 set firewall filter mirror_reductor term dst-http-https from destination-port 443 set firewall filter mirror_reductor term mirror then count mirror_reductor set firewall filter mirror_reductor term mirror then port-mirror-instance mirror_reductor set firewall filter mirror_reductor term default then accept set interfaces ae0 unit 0 family inet filter input mirror_reductor set interfaces ge-1/0/5 description --mirror-to-reductor-- set interfaces ge-1/0/5 unit 0 family inet address 192.168.98.1/30 arp 192.168.98.2 mac 00:11:22:33:44:55 set forwarding-options port-mirroring instance mirror_reductor family inet output interface ge-1/0/5.0 next-hop 192.168.98.2 set interfaces ge-1/1/0 gigether-options 802.3ad ae0 set interfaces ge-1/1/1 gigether-options 802.3ad ae0 set interfaces ge-1/1/2 gigether-options 802.3ad ae0 set interfaces ae0 unit 0 family inet address 123.143.143.246/30 -- Best regards Dmitry mailto:[email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
