Hello Victor, You are quite correct that you normally can only save the current configuration file; however I have just tested your assumption and this does work. The only snag was that I couldn't directly SCP the file onto the Juniper back in the correct directory (I didn't try as root), I put the file in /var/tmp then dropped into the shell and moved it over.
rollback rescue then loaded the file which I created. HTH, Graham Graham Brown Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> On 2 July 2015 at 20:44, Victor Sudakov <[email protected]> wrote: > Dear Colleagues, > > If I want my rescue configuration to be totally different from the > current config, how do I edit/upload it? Because the "request system > configuration rescue save" saves the current config as rescue. > > I just want a DHCP client on the management interface and some > local login/password authentication for a possible emergency. Anything > more than that is redundant. > > If I prepare a custom config offline and upload it as > /config/rescue.conf.gz, will this work? > > -- > Victor Sudakov, VAS4-RIPE, VAS47-RIPN > sip:[email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
