I wonder if some double sided tape would suffice to hold it in place until it needed to be replaced?
On 25 July 2015 at 00:13, Markus <[email protected]> wrote: > Am 23.07.2015 um 15:26 schrieb Colin Baker: >> >> Recently had a hard drive fail on one of our RE-850 in an M7i. Does >> anyone have a known working (preferably SSD) replacement they can >> recommend? I seem to remember something on juniper.cluepon.net that >> certain models don't fit on the RE board all that well, but the site has >> been down for awhile now. > > > A few weeks ago I used Transcend TS32GPSD330 but these newer Transcend > thingies still cannot get mounted properly and the result looks like this: > > http://truemetal.org/universe/blog/2013/03/upgrading-juniper-re-5-0-re-400-to-ssd/ > > Oh well, it was just a backup. > > I've also used KingSpec KSD-PA25.1-032MJ 32 GB in 2013 and KingSpec > KSD-PA25.6-032SS 32 GB (MLC) in 2014 and these work fine. E.g. > http://www.amazon.de/dp/B0047U977G - but it's MLC. > > With the KingSpecs you need to set the jumper to cable select or there'll be > problems. > > Good luck. > > PS: Sad to see cluepon is down. Why? > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
