Dave Bell wrote: > > I see two potential problems here. > > 1) SW2 is doing something weird and bleaching the frames before they > reach SW3.
No, it is not. Any COS value I set on Sw1 arrives intact at HostC _unless_ there is a rewrite-rule on Sw3 on egress. I thought I made it clear enough. Sw2 is above all suspicion. Whatever arrives through its trunk port, leaves intact through another trunk port. > 2) As you don't have a classifier on your ingress interface, I do have classifiers on Sw1 and Sw3. In fact I have classifiers on any access port where the client traffic (from HostA or HostB) enters the network. You can see that on the diagram. > > To fix this one, you need a classifier on ingress. Try something like > the following: On which switch/interface do you suggest putting this classifier? -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN sip:[email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
