I'd a quick look... I need a lot of luck... not exactly simple as with Cisco....
I will have some fun soon! Kind regards 2015-08-10 10:18 GMT+02:00 <[email protected]>: > Hi, > > David Roy made a kind of how to which worked on JunOS 11.4 but only on > DPC... Juniper was supposed to provide support for jsim on MPC as of JunOs > 13.x David did the spadework for this enhancement and added it in his day > one book "THIS WEEK: AN EXPERT PACKET WALKTHROUGH ON THE MX SERIES 3DPacket > walkthrough. This is as of page 26 > > > http://www.junosandme.net/article-junos-load-balancing-part-3-troubleshooting-109382234.html > <== DPC > > http://forums.juniper.net/t5/Day-One-Books/This-Week-An-Expert-Packet-Walkthrough-on-the-MX-Series-3D/ba-p/266799 > <== Day one book (you have to have a J-NET account) > > Have fun & Good luck :) > > > -----Message d'origine----- > De : juniper-nsp [mailto:[email protected]] De la part > de james list > Envoyé : lundi 10 août 2015 10:01 > À : [email protected] > Objet : [j-nsp] Test on LAG > > Hi gents, > > Is there a way to perform on MX the same test could be runned on Cisco > SUP2T ? > > > test etherchannel load-balance interface XXX > > > I’d like to check on MX the chosen way giving a source ip/mac and des > tip/mac on a LAG. > > > > Cheers > > James > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations > confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez > recu ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages > electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou > falsifie. Merci. > > This message and its attachments may contain confidential or privileged > information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and > delete this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been > modified, changed or falsified. > Thank you. > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
