1) Last reboot reason 0x1:power cycle/failure [Answer] This could be due to unexpected power failure or power loss to RE.
2) Last reboot reason Router rebooted after a normal shutdown. [Answer] This reason is shown when a reboot is requested using a cli command. When command "request system halt" is executed, the RE is halted and reboot reason is recorded as normal shutdown as you see below: "Mar 16 04:27:48 Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done syncing disks... All buffers synced. Uptime: 18m37s recorded reboot as normal shutdown The operating system has halted. Please press any key to reboot." After this event, if you hit enter the RE is rebooted and reboot reason is shown as "normal shutdown". _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
