So I found this document ( https://www.juniper.net/documentation/en_US/junos15.1/topics/reference/general/mx-series-software-license-features.html) and searched for "Multiservices DPC" and the following licenses came up:
Table 1: Junos OS Feature License Model Number for MX Series Routers Licensed Software Feature Supported Devices Model Number Flow monitoring and accounting features using J-Flow service on any Modular Port Concentrator (MPC) or Multiservices DPC MX960 S-ACCT-JFLOW-CHASSIS 2000 IKE sessions on Multiservices DPC; Chassis based, limited to 6000 per Chassis MX240, MX480, MX960 S-ES-2K 4000 IKE sessions on Multiservices DPC; Chassis based, limited to 6000 per Chassis MX240, MX480, MX960 S-ES-4K Upgrade from 2000 IKE sessions to 4000 IKE sessions on Multiservices DPC; Chassis based, limited to 6K per Chassis MX240, MX480, MX960 S-ES-4K-UPG 6000 IKE sessions on Multiservices DPC; Chassis based, limited to 6000 per Chassis MX240, MX480, MX960 S-ES-6K Upgrade from 4000 IKE sessions to 6000 IKE Sessions on Multiservices DPC; Chassis based, limited to 6000 per Chassis MX240, MX480, MX960 S-ES-6K-UPG Subscriber Aware Traffic Direct (per Multiservices DPC) MX960 S-MX-TD Subscriber and Application Aware Traffic Direct ( per Multiservices DPC) MX960 S-MX-TD-APP Upgrade to Traffic Direct Advanced (per Multiservices DPC) MX960 S-MX-TD-UPG Run one instance of the NAT and software on the Multiservices DPC MX960, MX480, MX240 S-NAT Run one instance of the SFW and software on the Multiservices DPC MX960, MX480, MX240 S-SFW I have the following questions regarding the above licenses: 1. Are any of these licenses not enforced aka included with the card? I know the MX80 for example has certain licenses that are included, but yet do now show up in the show licenses command. 2. The IKE session limits seem to start at 2000, and go up to 6000. What about under 2000? On Thu, Sep 17, 2015 at 9:10 PM, Nathan Ward <[email protected]> wrote: > They work great for CGN, and you can write your own applications for them, > too.. if you’re adventurous. > > -- > Nathan Ward > > > On 18/09/2015, at 13:37, Michael Gehrmann <[email protected]> > wrote: > > > > You would most likely need to get some licensing for the feature you wish > > to use. I have used MS-DPC cards for accounting/j-flow at 1:1 sampling > > rates. They can also be used for stateful firewall, tunnel services, > ipsec. > > > > > http://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/dpc-mx-series-ms-features.html > > > > > > Cheers > > Mike > > > > On 18 September 2015 at 09:11, Colton Conor <[email protected]> > wrote: > > > >> Is anyone aware of any licensing limitations on the MS-DPC card? > >> Considering buying a couple used ones, and throwing them into a MX960. I > >> can't seem to find much about the capabilities of this card. What do > most > >> people use this card for? > >> > >> > >> I know the MS-MIC is the replacement, but nowhere near the price point > on > >> the used market. > >> _______________________________________________ > >> juniper-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/juniper-nsp > >> > > > > > > > > -- > > Michael Gehrmann > > Senior Network Engineer - Atlassian > > m: +61 407 570 658 > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
