Hello, If you're worried about the link flapping, just set a Down-->Up hold-timer directly on the interface.
http://www.juniper.net/documentation/en_US/junos15.1/topics/reference/configuration-statement/hold-time-edit-interfaces.html Serge On Mon, Oct 19, 2015 at 11:33 AM, james list <[email protected]> wrote: > Dear experts, > > I currently have a wan link between two MXs that sometimes is experiencing > errors. > > I’ve on top of the link OSPF (timer 1/3) as routing protocol and I’d like > to find out any possible way to exclude the link when errors are in place > and below to the 3 seconds of the OSPF timers. > > > I’ve analyzed the following: > > 1) BFD with OSPF but it doesn’t support hold-time (as BGP does), in > order to avoid OSPF flapping and generate higher instability I cannot use > it > > 2) RPM event based script: probe interval is currently not below of 1 > second, hence to detect results with no false positive I need some sampling > and we’re still at 3 seconds or more > > Any other possible options ? > > OAM ? does it support hold-time ? > > > Cheers > > James > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
