That's another weird part. It's not connected to anything, and there's no
vc-port recognized:
root> show virtual-chassis
Virtual Chassis ID: 1517.c443.48e0
Virtual Chassis Mode: Enabled
Mstr Mixed Route Neigh
bor List
Member ID Status Serial No Model prio Role Mode Mode ID I
nterface
0 (FPC 0) Prsnt TR0214440089 qfx5100-48c-6q 128 Master* N VC
Member ID for next new member: 1 (FPC 1)
{linecard:0}
root> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
{linecard:0}
root>
I think I've got a lemon, here, but as always, I really appreciate everyone's
input.
Thanks much.
--Dave Peters
-----Original Message-----
From: Alexandre Guimaraes [mailto:[email protected]]
Sent: Friday, November 13, 2015 8:22 AM
To: Dave Peters - Terabit Systems; [email protected]
Subject: RES: VC on a QFX5100 won't go away
> show virtual-chassis
Preprovisioned Virtual Chassis
Virtual Chassis ID: cf12.a99f.e63b
Virtual Chassis Mode: Enabled
Mstr Mixed Route
Neighbor List
Member ID Status Serial No Model prio Role Mode Mode ID
Interface
0 (FPC 0) Prsnt TA3714071234 qfx5100-48s-6q 129 Master* N VC 2
vcp-255/0/50
1 vcp-255/0/51
1 (FPC 1) Prsnt TA3714141234 qfx5100-48s-6q 129 Backup N VC 0
vcp-255/0/50
2 vcp-255/0/51
2 (FPC 2) Prsnt TA3714141234 qfx5100-48s-6q 0 Linecard N VC 1
vcp-255/0/50
0 vcp-255/0/51
See vcp-255/0/51 ports:
> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
0/50 Configured -1 Up 40000 2 vcp-255/0/51
0/51 Configured -1 Up 40000 1 vcp-255/0/50
fpc1:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
0/50 Configured -1 Up 40000 0 vcp-255/0/51
0/51 Configured -1 Up 40000 2 vcp-255/0/50
fpc2:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
0/50 Configured -1 Up 40000 1 vcp-255/0/51
0/51 Configured -1 Up 40000 0 vcp-255/0/50
So:
request virtual-chassis vc-port delete pic-slot X port Y member Z
-----Mensagem original-----
De: juniper-nsp [mailto:[email protected]] Em nome de Dave
Peters - Terabit Systems Enviada em: quinta-feira, 12 de novembro de 2015 18:05
Para: [email protected]
Assunto: [j-nsp] VC on a QFX5100 won't go away
Hi all--
I've been trying to remove the VC config from a QFX5100 running 13.2X51-D38,
and I'm not having any luck. I've tried zeroizing and going into the shell to
remove the files in the config/vchassis folder, but I'm having no luck.
Looking at the config, I'm seeing:
root> show configuration
<snip>
commit {
factory-settings {
reset-virtual-chassis-configuration;
reset-chassis-lcd-menu;
<snip>
root>
Which isn't on a factory default system, but I can't seem to clear that portion
of the configuration, and I when I delete the .conf files from the shell, the
commit/factory-settings/reset-vc stuff pops up all over again.
This is probably a really simple thing, but I'm not getting it. Can anyone help?
Thanks much.
--Dave Peters
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
