Hello,
I have 3 MX series routers connected via 3 10G circuits A - B - C -A.
OSPD, MPLS, RSVP, LDP are all running
inet-vpn any configured on the BGP groups
I’m trying to build a routing-instance on MX-A & MX -B with some local
interfaces and then have the two routing-instances be able to talk to each
other over the MPLS network (A-B or A-C-B)
Does anyone have any documentation on how to configure this? I’ve read a
bunch of L3VPN JunOS docs but they all have CE, PE, P routers. In my case the
routers A & B are acting as CE & PE while router C is acting as P
MX-A has a config:
CROCKER-VOIP {
instance-type vrf;
interface ge-2/0/8.13;
route-distinguisher 10.126.13.1:1;
vrf-export export-direct;
vrf-target target:7849:13;
}
# run show route table CROCKER-VOIP
CROCKER-VOIP.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.126.13.0/30 *[Direct/0] 00:38:46
> via ge-2/0/8.13
10.126.13.1/32 *[Local/0] 00:38:46
Local via ge-2/0/8.13
MX-B has a config:
routing-instance
CROCKER-VOIP {
instance-type vrf;
interface ae0.301;
interface ae0.302;
route-distinguisher 10.127.13.1:1;
vrf-export export-direct;
vrf-target target:7849:13;
}
# run show route table CROCKER-VOIP
CROCKER-VOIP.inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.127.13.0/30 *[Direct/0] 00:47:21
> via ae0.301
10.127.13.1/32 *[Local/0] 00:47:21
Local via ae0.301
10.127.13.4/30 *[Direct/0] 00:47:21
> via ae0.302
10.127.13.5/32 *[Local/0] 00:47:21
Local via e0.302
A ‘show run bgp sum’ bgp.l3vpn.0 with 0 routes
Do I need to build a MPLS connection interface between the two
routing-instances?
—
Matthew Crocker
President - Crocker Communications, Inc.
Managing Partner - Crocker Telecommunications, LLC
E: [email protected]
E: [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
