Hi I did not understand what are saying. Anyway I personally installed the modules on the chassis so I am sure there is no PIC Tunnel on FPC2,3,4.
GRE source destinations are on Interfaces which reside on other FPCs but GRE tunnel interface is on FPC0 or FPC1. Also I must mention FPC type is different: FPC 0 REV 05 ------- ------ M320 E3-FPC Type 3 I3MB A REV 04 ------- ------ M320 E3-FPC I3 Mez Board I3MB B REV 04 ------- ------ M320 E3-FPC I3 Mez Board FPC 1 REV 02 ------- ------ M320 E3-FPC Type 3 I3MB A REV 06 ------- ------ M320 E3-FPC I3 Mez Board I3MB B REV 06 ------- ------ M320 E3-FPC I3 Mez Board FPC 2 REV 07 ------- ------ M320 E2-FPC Type 1 CPU REV 04 ------- ------ M320 FPC CPU FPC 3 REV 05 ------- ------ M320 E2-FPC Type 3 CPU REV 04 ------- ------ M320 FPC CPU FPC 4 REV 08 ------- ------ M320 E2-FPC Type 3 CPU REV 04 ------- ------ M320 FPC CPU From: Alireza Soltanian [mailto:[email protected]] Sent: Monday, January 4, 2016 2:39 PM To: '[email protected]' <[email protected]> Subject: Strange Log about GRE Keepalive Hi On our M320 we always have this log: fpc2 pfe doesn't support GRE Keepalives fpc4 pfe doesn't support GRE Keepalives fpc3 pfe doesn't support GRE Keepalives The point is we don't have Tunnel PIC on these FPCs but we have on FPC0 and FPC1. Also GRE keepalive was configured for tunnels on those PICs. Is there any method for suppressing this log? Thank you for your help and support _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
