Hi folks,
Where are the “VRF specific” forwarding-filters executed please?
In a setup like this:
set routing-instances TEST_VRF forwarding-options family inet filter input
TEST_FW_IN
WAN-W—PFE-W--Fabric—PFE-E—WAN-E
PFE-West hosts an MPLS interface
PFE-East hosts a TEST_VRF interface
Fact:
East to West as well as West to East traffic is subject to the forwarding-filter
A)
Is the West to East as well as East to West filtering be done on PFE-East?
B)
Is the West to East filtering done on PFE-West
And East to West filtering be done on PFE-East?
Note:
If the filter is applied as input filter to the VRF, then filter is applied
before route lookup
And output filter at the VRF level would mean filtering is done after route
lookup
adam
Adam Vitkovsky
IP Engineer
T: 0333 006 5936
E: [email protected]
W: www.gamma.co.uk
This is an email from Gamma Telecom Ltd, trading as “Gamma”. The contents of
this email are confidential to the ordinary user of the email address to which
it was addressed. This email is not intended to create any legal relationship.
No one else may place any reliance upon it, or copy or forward all or any of it
in any form (unless otherwise notified). If you receive this email in error,
please accept our apologies, we would be obliged if you would telephone our
postmaster on +44 (0) 808 178 9652 or email [email protected]
Gamma Telecom Limited, a company incorporated in England and Wales, with
limited liability, with registered number 04340834, and whose registered office
is at 5 Fleet Place London EC4M 7RD and whose principal place of business is at
Kings House, Kings Road West, Newbury, Berkshire, RG14 5BY.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
