Hi all: Can anyone help me define some of these counters I'm seeing on our FPCs? When I run
request pfe execute target fpc2 command "show jnh 0 sample-inline statistics ipv4" SENT: Ukern command: show jnh 0 sample-inline statistics ipv4 GOT: GOT: GOT: Protocol :2 GOT: Flow Packet Count :5789149275620 GOT: Flow Byte Count :5673740587208686 GOT: Total inserted Flows :176810413029 GOT: Total deleted Flows :176793898277 GOT: Inactive Timed Out Flows :162771518964 GOT: Active Timed Out Flows :14023413845 GOT: Active Flows :16514752 GOT: Export Packet Count :34359297776 GOT: Flows Exported Count :171053892730 GOT: Flow Collision Error :12960957608 GOT: Flow Insert Error :243576966918 GOT: Flow Delete Error :0 GOT: AS Lookup Error :1968 GOT: RR Lookup Error :151348580782 GOT: Flow Export Error :0 GOT: Flow insert Policer Drops :278853233 LOCAL: End of file Flow insert Policer Drops, AS Lookup Error, RR Lookup Error, Flow Collision Error, Flow Insert Error are all incrementing. I can kind of infer what these mean if I think of a flow export table that fills up with flow data and then is sent off in a record to the collector (ie, policer makes sure the table capacity is never overrun), but am completely clueless about flow collisions, insert errors RR Lookup Errors (what's a route reflector got to do with exporting IPFIX?) and whether or not my assumptions about the table and policers are right or wrong. Googling these doesn't really turn up much aside from old j-nsp posts where most folks seem as confused as I as to what precisely these mean. Thanks, Dan _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
