Add connectivity-type irb; to the vpls {} stanza.
i.e. at [edit routing-instances TEST protocols vpls]
"Specifies when a VPLS connection is taken down depending on whether or not the
interface for the VPLS routing instance is customer-facing or integrated
routing and bridging (IRB)..."
ce (default) — Require that for the VPLS connection to be up, the
customer-facing interface for the VPLS routing instance must also be up. If the
customer-facing interface fails, the VPLS connection is taken down.
irb — Allow a VPLS connection to remain up so long as an IRB
interface is configured for the VPLS routing instance.
permanent — Allow a VPLS connection to remain up until specifically
taken down.
http://www.juniper.net/documentation/en_US/junos15.1/topics/reference/configuration-statement/connectivity-type-edit-protocols-vpls.html
On 20 Apr 2016, at 9:14 am, [email protected] wrote:
> TEST {
> instance-type virtual-switch;
> route-distinguisher 1.2.3.5:1111;
> vrf-target target:1111:1111;
> protocols {
> vpls {
> site-range 3;
> no-tunnel-services;
> site B {
> site-identifier 1;
> }
> }
> }
> bridge-domains {
> vlan1111 {
> vlan-id 1111;
> routing-interface irb.1111;
> }
> }
> }
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
