Can't actually picture what you are really trying to achieve here with an irb and multiple vlan tags, but did you try configuring `vlan-id-list` under the logical unit? That or vlan-id-range might be useful.
If what i just said was totally irrelevant to you, please elaborate the picture and the problem you are facing :p -Khairul On April 23, 2016 5:06:11 AM GMT+06:00, Aaron <[email protected]> wrote: >Hmmmm, ok then, I wonder if anyone knows if there's a way to configure >a vlan list with tags 10 and 17 into the same unit number ? that way >when I put that unit/logical interface into a vlan (aka BD) then it's >only one unit/logical interface. > >Aaron > >-----Original Message----- >From: [email protected] [mailto:[email protected]] On Behalf Of >Daniel Verlouw >Sent: Friday, April 22, 2016 12:34 PM >To: Aaron <[email protected]> >Cc: juniper-nsp List <[email protected]> >Subject: Re: [j-nsp] ACX5048 - vlan-map conflict with routing-instance >with vlan-id tags > >Hi Aaron, > >On Thu, Apr 21, 2016 at 10:20 PM, Aaron <[email protected]> wrote: >> agould@eng-lab-5048-1# commit >> [edit vlans vlan10] >> 'interface ge-0/0/38.17' >> l2ald ACX: On a bd, for each ifd only one ifl can be added [edit >> vlans] >> Failed to parse vlan hierarchy completely >> error: configuration check-out failed > >that's a different issue from the vlan-swap problem you had, and is >actually a known limitation described in the manual/rel.notes; > >"A bridge domain cannot have two or more logical interfaces that belong >to the same physical interface." > > --Daniel. > >_______________________________________________ >juniper-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/juniper-nsp -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
