> Can't actually picture what you are really trying to achieve here with an > irb and multiple vlan tags, but did you try configuring `vlan-id-list` under > the logical unit? That or vlan-id-range might be useful. > > If what i just said was totally irrelevant to you, please elaborate the > picture and the problem you are facing :p >
I suspect what he is asking for is a valid configuration on the ACX that is similar to what you can do on the MX - he has customers on different VLANs that he wants to put into the same broadcast domain: MX Config: set interfaces ge-1/1/1 unit 281 encapsulation vlan-bridge set interfaces ge-1/1/1 unit 281 vlan-id 281 set interfaces ge-1/1/1 unit 282 encapsulation vlan-bridge set interfaces ge-1/1/1 unit 282 vlan-id 282 set interfaces irb unit 128 family inet address 192.168.254.1/24 set bridge-domains shared-bd description "Shared Bridge Domain" set bridge-domains shared-bd domain-type bridge set bridge-domains shared-bd vlan-id 128 set bridge-domains shared-bd interface ge-1/1/1.281 set bridge-domains shared-bd interface ge-1/1/1.282 Not sure if it's the same on ACX, or even if it's possible, but the above configuration works on the MX for aggregating mismatched VLANs into one bridge domain. -evt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
