I have one in a very similar configuration, with three full feeds in
IPv4 and IPv6.
It generally works just fine, but convergence time is slow. It can take
two minutes to process the full feed, and if you restart the box, it
will take even longer.
It's a good machine for a small ISP though.
-Tim
On 2016-04-26 08:33 AM, [email protected] wrote:
Has anyone ever tried full IPv4 routes on a MX5? We have 3 peers + iBGP. We
were told in the past that when a BGP session drops the MX5 could lock up
for up to 2 minutes.
We have MX80s (essentially the same box) with full Internet routing
table. It works but is not recommended: RE memory (2 GB) is rather
limited, and convergence time is not great.
Steinar Haug, Nethelp consulting, [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Tim St. Pierre
System Operator
Communicate Freely
www.communicatefreely.net
289-225-1220 x5101
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
