Hey all, I could very well either be doing this completely wrong, or attempting to do the impossible, but...
We have BIRD on Linux using BGP to send prefixes to the MX104 over a direct connection, I need to send those prefixes to an MX80 directly connected to the 104. At the 104 end of the 104<->80 peering there is just an export policy, that simply matches on "from protocol bgp" and the BGP community assigned the prefixes I want, then accept and next-hop self. In isolation, the policy works. > test policy blah <prefix>/32 ... ... Policy blah: 1 prefix accepted, 0 prefix rejected The MX104 never actually advertises any prefixes to the MX80 though. > show route advertising-protocol bgp <mx80> ... zilch ... Is there some inbuilt protection preventing iBGP prefixes from being sent to another iBGP neighbour? Or am I just doing it wrong? advertise-peer-as and as-override have no impact. Thanks -- Mike Williams _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
