Well the documentation can be confusing.
In re0 and re1 group you put the configuration specific to one RE. On my
router I only set the host-name.
The loopback does not have to be different between the two RE, so you
can let it on the standard hierarchy.
--
Raphael Mazelier
Le 09/05/2016 à 14:11, v a écrit :
Hello,
I am new to networking and trying to understand the initial
configuration on a Juniper MX router with dual REs:
http://www.juniper.net/techpubs/en_US/junos14.2/topics/task/configuration/routing-engine-dual-initial-configuration.html
Step 6 is the following:
" Set the loopback interface address for the re0 configuration group:
[edit groups]
root@host# set re0 interfaces lo0 unit 0 family inet address
address/prefix-length"
Why do I need to give the re0 group a loopback interface address in
the first place?
What address should I give to the loopback interface?
Regards,
v
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
