Thanks Raphael, My core links are untagged typically... in rare case I'll tag, and it doesn't seem to be a problem, I haven't done that on acx5048 yet
Ok I did MEF EPL (eline port based carrying any and all vlans, tagged and untagged...) works. I shut and deactivate core bgp for this test to prove that it's purely igp, mpls, ldp to make it work. Ce-ce pings and l2protocols seem to be fine ( I tested cdp and stp for CE to CE and it's fine )...of course the config's below are the MPLS PE's... the ce's I mention are not shown anywhere here. ---3600 interface GigabitEthernet0/15 switchport trunk allowed vlan none switchport mode trunk load-interval 30 service instance 1 ethernet encapsulation default l2protocol forward xconnect 10.101.12.245 999 encapsulation mpls --- ACX5048 set protocols l2circuit neighbor 10.101.12.251 interface ge-0/0/38.0 virtual-circuit-id 999 set interfaces ge-0/0/38 encapsulation ethernet-ccc set interfaces ge-0/0/38 unit 0 family ccc - Aaron _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
