Honestly 10G interfaces is not needed now nor anytime soon but would be nice to
have the option down the road. The current router is acting as B-RAS and a VLAN
router on 3 interfaces. I'm only pushing 400-500MB per physical interface. The
main reason for the upgrade is to refresh the age of the underlying hardware.
From: Giuliano Medalha <[email protected]>
To: Jason Warren <[email protected]>
Cc: "[email protected]" <[email protected]>
Sent: Monday, May 9, 2016 1:55 PM
Subject: Re: [j-nsp] B-RAS services
Would be better to buy MX104 instead of MX80.
Do you need 10G interfaces or not ?
If you need only 20 x 1G SFP is better option to use MX104 (MX5 option) because
of 4GB DRAM option.
Do not forget the to buy SSM license (for CoA) optional ok ?
Att,
Giuliano
Giuliano Cardozo Medalha
Systems Engineer
+55 (17) 3011-3811+55 (17) 98112-5394
JUNIPER J-PARTNER ELITE
[email protected]
http://www.wztech.com.br/
WZTECH is registered trademark of WZTECH NETWORKS.
Copyright © 2016 WZTECH NETWORKS. All Rights Reserved.
IMPORTANTE:
As informações deste e-mail e o conteúdo dos eventuais documentos anexos são
confidenciais e para conhecimento exclusivo do destinatário. Se o leitor desta
mensagem não for o seu destinatário,
fica desde já notificado de que não poderá divulgar, distribuir ou, sob
qualquer forma, dar conhecimento a terceiros das informações e do conteúdo dos
documentos anexos. Neste caso, favor comunicar imediatamente
o remetente, respondendo este e-mail ou telefonando ao mesmo, e em seguida
apague-o.
CONFIDENTIALITY NOTICE:
The information transmitted in this email message and any attachments are
solely for the intended recipient and may contain confidential or privileged
information. If you are not the intended recipient, any review, transmission,
dissemination or other use of this information is prohibited. If you have
received this communication in error, please notify the sender immediately and
delete the material from any computer, including any copies.
On Mon, May 9, 2016 at 3:45 PM, Jason Warren via juniper-nsp
<[email protected]> wrote:
I have a Cisco 7206VXR that I am wanting to replace with a Juniper MX80
(purchased as an MX5) or similar. The main core function is just Ethernet
routing... but it also is acting as a B-RAS router for about 400 PPPoE
sessions. I know the license cost on the MX80 for subscriber services is close
to $15k.. which honestly puts it out of budget and pushes me back to a
re-manufactured Cisco ASR.. Does anyone have some recommendations as to how to
pull this off in a Juniper world? I was told by a VAR that on some of the
larger Juniper chassis, this is not an issue as it is commonly included but
unfortunately he was not positive which chassis this would be.
My current thought is to maybe put a Cisco 7301 to service this function if
nothing else...
Thank you in advance for any experience and advice anyone can offer!
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
