On Sun, Jun 05, 2016 at 11:10:05AM +0300, Mohammad Khalil wrote: > I want to translate from Junos to IOS , I have checked the tool on Juniper > website , it translates from IOS to Junos not vice versa , any ideas guys?
I would expect to find such a tool on *cisco's* website, its not like a vendor will write a tool for you to go away from them. But then again I wouldn't expect Cisco to be that accomidating either. I've not heard of such a tool, of course several vendors provide an IOS to their kit, but the opposite doesn't tend to happen all that often. And with the slight subtle differences in IOS vs IOS-XE and IOS-XR depending on what your target platform is, might be pretty difficult to maintain. It would probably be pretty straight forward to translate Juniper configs over to IOS, the layout of the config should be pretty straightforward and self-documenting (unlike IOS, with hidden defaults, or really magical things, like dynamic routing prefix filter lists). _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp