Hi Aaron, Perhaps can I do this using rib-groups within bgp neighbor family inet unicast knob?
I also tried declare bgp neighbor in main table, but even leaking connected routes, they say "No route to host" but the routes are there. Thanks. 2016-07-05 0:07 GMT-03:00 Aaron Dewell <[email protected]>: > > The routes have to exist in the table in order to be available to a policy. > So you’ll have to leak them first. > > Any policy only has access to the routes within it’s context. > > You could route them to discard after they are leaked however. That way, > they still exist even if they are inactive. (see the advertise-inactive > knob). > >> On Jul 4, 2016, at 9:02 PM, Eduardo Schoedler <[email protected]> wrote: >> >> Can I announce all prefixes from main table in a bgp session that is >> into a routing-instance? I can't leak the prefixes, only advertise >> them, because it's a looking glass session, like Routeviews. >> >> All tips are welcome. >> >> Thank you. >> >> Regards, >> >> -- >> Eduardo Schoedler >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Eduardo Schoedler _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
