On 07/27/2016 12:09 AM, Sachin Rai wrote:
Hi Mike,
Will it be possible for you to share a bit more information on the
type of setup you are planning. Will it be a DC, an Office HQ, or for any
ISP.
Reason being is:
1. You need 10 Gig connectivity with your ISP.
2. You want full routing tables.
3. Number of ISPs you are planning to have on this router.
4. You are planning to have DDOS mitigation in place.
These are the points which will have impact on choosing the correct
router for you.
Sure.
Im in a colo in one location (A), and have a private 1G ethernet to
another geographically distant colo (B). Each colo has a different ip
transit provider and I am advertising my own prefixes. At colo A I
receive a subset of Internet routes internal to that provider, while at
colo B I get full tables. Id like to like to exchange routes between
Colo A & B for better routing as well as for failover in the event I
lose ip transit at either location.
The box I'd like to spec would be at my Colo B location and would
have two ISP connections, with the addition of possibly one additional
full set of routes from elsewhere. Colo B would have 1 10gbps ip transit
port, and 1 1gbps ip transit port, and do some basic DDoS mitigation to
prevent flooding the private 1G to colo A with useless traffic.
Thank you.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
