Seems to drop a little (not as much as I thought). What I found a little odd is that simply disabling the import policy on the BGP peer didn't result in decreased CPU after 15mins. I rebooted the MX80 and after the ~15mins of BGP flooding and convergence the CPU has calmed down a little.
The RPKI you guys have enabled; is it just to test building the validation database? On Wed, Aug 17, 2016 at 9:54 AM, Mark Tinka <[email protected]> wrote: > > > On 17/Aug/16 16:46, Brad Fleming wrote: > > Hello all, > > We’ve been playing around a bit with BGP origin validation on a lab MX80. > While everything seems to work CPU load is pretty high. We’ve observed this > elevated CPU with both 14.3R<something> and 16.1R1.7. Just wondering if > anyone else experienced similar or whether we’ve configured something > sideways and caused a problem. > > > We have RPKI enabled on our MX routers (including the MX80), but not > performing any policy. > > Does your CPU utilization reduce if you disable the policies that work on > RPKI? > > Mark. > -- Brad Fleming [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
