I think I answered this one a bit too fast, ISSU wouldn't be useful OP's case.
My bad. > Le 22 août 2016 à 21:55, Youssef Bengelloun-Zahr <[email protected]> a écrit : > > One can always try ISSU, we performed it successfully on 5600 cluster > multiple times. > > HTH. > > > >> Le 22 août 2016 à 21:33, Amos Rosenboim <[email protected]> a écrit : >> >> Dovid, >> >> We just finished a project with 6 data centers, all with SRXs. >> There was no downtime as we rebooted the secondary, then failed the cluster >> to it and rebooted the primary. >> >> >> Amos >> >> Sent from my iPhone >> >> On 22 Aug 2016, at 21:56, Dovid Bender >> <[email protected]<mailto:[email protected]>> wrote: >> >> Hi, >> >> We have two SRX 550's in an HA cluster. We are working on enabling IPv6 >> (finally....). I was told that when we do: >> >> set security forwarding-options family inet6 mode flow-based >> >> >> We will need a reboot. Does anyone know about how long it takes for 550's >> to reboot and come back up? Also any ways to eliminate down time? >> >> TIA. >> >> Dovid >> _______________________________________________ >> juniper-nsp mailing list >> [email protected]<mailto:[email protected]> >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
