Hello there,
Looks like You have a dirty optic/bent cable/incompletely plugged-in
connector in that one.
Check the light levels and PCS errors section in "show interfaces
extensive xe-x/x/x" printout, it may get You some clues.
HTH
Thx
Alex
On 23/08/2016 09:43, Jeffrey Nikoletich wrote:
So I did some testing with the tcp-mss setting and they did not seem to
help. Oddly enough when I disabled one of the AE interfaces (xe-x/x/x) I
then was able to get ample speeds. Any idea why? Is there a way to have AE
interfaces in a active/passive setup?
*
Regards,
Jeffrey Nikoletich - Chief Information Officer | 213-201-6080
Xfernet
| 1-855-XFERNETPh 213-201-6080 | http://www.xfernet.net
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
