Updated from 14.2 to 15.1R here (on several MX, same RE hardware).
Didn't see this issue.
Any particular stuff in your filters ?

> Le 18 sept. 2016 à 09:18, Chuck Anderson <c...@wpi.edu> a écrit :
> 
> Has anyone upgraded from 14.2 to 15.1 and seen this issue?  Right
> after the upgrade, all loopback filters started dropping all traffic
> causing OSPF & BGP failures, inability to ping or SSH into fxp0, etc.,
> despite being configured to allow the appropriate management & control
> plane traffic which was working perfectly fine in 14.2.
> Deactivating/reactivating the filters "fixed" the issue, as did a full
> box reboot.  Of course JTAC can't reproduce it.  64-bit Junos,
> RE-1800X4's.


_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to