Only ever seen one of them fail ever… typically quite dependable - the one that I had fail was a flash issue so it would power up and then crap out
This sounds like a power supply issue or something along those lines especially if you’re getting no lights or anything - suggest contacting Juniper to see if they can RMA it for you Thanks, Paul > On Oct 3, 2016, at 10:26 AM, Valentini, Lucio <[email protected]> wrote: > > Hi all, > > today I tried to power up an EX2200C on my desk, after I had switched it off > through the CLI last week. > But it wouldn´t power up. None of the LEDs lit up. I changed the cables and > the power slot, but the result is the same. What can have been to cause ? an > ESD? But how? I´m sure it never feel on the ground. It has been on my desktop > PC for a couple of months and it always worked fine until today. > Any ideas? > > Thanks > > Lucio > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
