Hi Theo, I can double check with testbed but 90% sure was after both RE were running same code and it was not necessary to reboot them, apart from the ones required for the upgrade process.
Santi On 26 Oct 2016 14:19, "Theo Voss" <[email protected]> wrote: Hi Santiago, did the alarm disappeared after the 2nd RE was detected with the same software or after a complete reboot? Best regards, Theo *Von: *santiago martinez <[email protected]> *Datum: *Mittwoch, 26. Oktober 2016 um 15:15 *An: *Theo Voss <[email protected]> *Cc: *"[email protected]" <[email protected]>, Olivier Benghozi <[email protected]> *Betreff: *Re: [j-nsp] MX 14.2R7 / PR1177571 Hi there, yes we did hit the same PR. the alarm was raised during the upgrade and completely disappear after both RE. were running the same code version (14.2R6). Regards santiago On 26 Oct 2016 12:00, "Theo Voss" <[email protected]> wrote: Hi Olivier, thanks for your reply. Yes, /var is correctly mounted. Best regards, Theo -----Ursprüngliche Nachricht----- Von: juniper-nsp <[email protected]> im Auftrag von Olivier Benghozi <[email protected]> Datum: Mittwoch, 26. Oktober 2016 um 10:59 An: "[email protected]" <[email protected]> Betreff: Re: [j-nsp] MX 14.2R7 / PR1177571 Yes but with 14.2R6 on re0 and 15.1R4 on re1 (so, during the update). Did you check that /var was properly mounted on re1? :) > Le 26 oct. 2016 à 10:53, Theo Voss <[email protected]> a écrit : > > we've upgraded two of our MXs (MX960, 1800x4-32) to 14.2R7 and ran into PR1177571 which should already be fixed in R7. > > router> show version invoke-on all-routing-engines | match boot > JUNOS Base OS boot [14.2R7.5] > JUNOS Base OS boot [14.2R7.5] > > router> show system alarms > 1 alarms currently active > Alarm time Class Description > 2016-10-25 23:36:53 UTC Major Host 1 failed to mount /var off HDD, emergency /var created > > Workaround according to Juniper: Upgrade backup RE to the same release with master RE. << see "show version". > Resolved In: 13.3R9-S4 13.3R10 14.1R8 >> 14.2R7 << 15.1R4 15.1R5 15.1F5-S3 15.1F6-S1 16.1X70-D10 16.1R2 << see "show version". > > Has anybody encountered the same problem? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
